噴砂（丸）房型號廠品

油船數段涂裝工藝房-運輸船只特涂專用設備

Ship section coating room-special ship coating equipment

1、一項強制性涂裝工藝工程作業正確；原則是呵護浮游生物的環境；次、兩次工作Sa2.5級；另一種確定表層方向操作人類壽命15年建設技術性。

2、（邊角園角）2mm；涂膜毀掉不低于2%或25m2,噴砂操作Sa2.5級。

3、（越來越粗糙度）30-75um；表層水溫比露點高3℃；干膜板厚320um。

4、（科粒大小不一）3、4、5塵埃占比1級；光學顯微鏡看不見更小臟東西清理。

5、（氯化鈉）50mg/m2；500總噸船用海面艙；150m長散貨船雙舷側。

6、涂裝生產線的技術型號書6基本特征：類產稱謂稱、表層涂料、鋪設策略、膜厚空間、前治療、區域環境。

7、70%Sa2級（經過多次實驗發現不一格底漆）；符合標準證書底漆掃砂或壓力水拆洗。

8、（相對應溫度）不低于85%。

9、90/10條件：90%達成規范值，10%做到規范值的90%。

1.A mandatory coating construction standard; Purpose is to protect the Marine environment; Once, twice Sa2.5 processing level; A kind of guarantee coating goal service life 15 years construction technology.

2.(the edge horn) 2 mm; Coating damage is more than 2% or 25 m2, sandblasting processing Sa2.5 level.

3.(roughness) 30 75 um; The surface temperature than dew point 3 ℃ high; Dry film thickness 320 um.

4.(particle size) 3, 4, and 5 dust distribution grade 1; Visible to the naked eye more little dust removal.

5.(sodium chloride) 50 mg/m2; 500 gross tons special water tank ship; 150 m long bulk carrier double side to side.

6.coating technology specification 6 elements: product name, coating materials, construction method, film thickness range, pretreatment, the environment.

7.70% Sa2 level (experiment unqualified primer); Qualified primer and sand or high pressure water cleaning.

8.(relative humidity) less than 85%.

9.90/10 rule: 90% to 10% of the value standard of 90%.

按照其制約規范，當我們的的服務機率有此類：

1、各位能夠 我認為僅有涂裝工藝房不必定能能夠滿足PSPC規程，找不到涂漆房更不能擁有規程；故此找不到涂漆房的我門都能可能好處的建設，有涂漆房的我門都能可能好處完整。

2、15年安全使用保修期的規范起來，可能會對其它的服務行業有照搬功效。

3、場景.我行保證無感染。

4、Sa2.5級代表著效率高噴砂和收集軟件的食用和可以改善。

5、粗糙，度把控好含意著磨料磨具溶合裝備的要提高了了（永久保存細顆料，出掉煙塵）。

6、溫度、濕球溫度、強度的測量儀器設備利用率有很大的升高。

7、堿度、洗滌度、臟污監測大量購買。

8、面上吸塵器機 （電動四輪、氣動彈簧、防火）很多運行。

9、噴涂房照明燈具裝置也許必須要有效改善，采用照明燈具、規劃搭建、裝基礎施工。

10、為提高自然環境制約先決條件：合理性的除塵處理機系統性的、綠色建筑的預熱機系統性的、可信的空調除濕機系統性的成了涂裝工藝工程需要機器設備。

According to the standard requirement, our service opportunities have these:

1.We can think only painting room can not meet the PSPC standard, no more can't satisfy the standard coating room; So there is no painting room we can help construction, painting the room we can help improve.

2.15 years of service life standard for other industries, may be a reference for.

3. we can do no pollution environment.

4.Sa2.5 level means efficient sandblasting and recovery system and improve the use of.

5.Roughness control means abrasive separation device demand rose (save fine particles, remove dust).

6.Temperature, humidity, thickness testing instrument utilization rate is greatly increased.

7.And salinity, cleanness and dust detection in large quantities.

8.surface aspiration equipment (electrical, pneumatic, explosion-proof) used in large amounts.

9.Painting room lighting facilities may need to improve, choose lamps and lanterns, design installation, construction.

10.To ensure the environmental restrictions conditions: reasonable dust removal system, the energy saving of the heating system, reliable dehumidification system construction must be coating equipment.

面臨輪船修造的行業IMO涂膜性標淮(PSPC)的實施，斯特爾機械提供船舶噴砂涂裝設備系統整體解決方案及技術支持，為船舶修造行業設計制造完善的船舶分段噴砂房噴漆房，鋼板拋丸預處理線，舾裝件、艙口蓋等船體部件二次分段涂裝房，壓載艙特涂設備，連續高效噴砂設備及回砂系統設備，精準的砂塵分離裝置，環保節能型除塵設備，大中型真空吸砂設備，組合式除濕機，高效暖風機，移動防爆風機，電動/氣動平衡/隔爆型除塵機械機 ，壓力水除污機械機 ，熱度、溫度濕度、高度檢查實驗室的設備，含鹽量、擦洗度、塵埃用檢查機械機 。

Facing the ship building and industry IMO coating properties standard (PSPC), the implementation of the frost's mechanical professional ships provide gush arenaceous coating equipment system overall solutions and technical support, for ship building industry professional design manufacturing perfect ship segmentation gush arenaceous room spray-paint room, steel plate is shot pretreatment line, outfitting a, hatch cover parts such as secondary section hull coating room, water ballast tank with equipment, high efficiency, continuous sand blasting equipment and back, the fine sand system equipment sand dust separation device, environmental protection energy-saving dust removal equipment, large and medium-sized vacuum sand blasting equipment, assembled dehumidified machines, efficient warm air blower, mobile explosion-proof electric fan, / pneumatic/explosion-proof type aspiration equipment, high pressure water cleaning equipment, temperature, humidity, thickness testing instrument, salinity, cleanliness, dust special test equipment.